B0049 Guide to Diagnosing
Third Row Right Frontal Stage 1 Deployment Control
The OBD-II code B0049 refers to a Third Row Right Frontal Stage 1 Deployment Control issue. It is a diagnostic trouble code (DTC) related to the vehicle’s airbag system. Specifically, this code indicates a fault with the deployment control of the third-row right frontal airbag (typically the airbag on the right side of the third row of seating).
Symptoms:
Airbag Warning Light, Fault Airbag Deployment
Possible Causes of B0049 Code :
- Faulty Airbag Sensor or Wiring: The sensor that monitors the right frontal airbag may be malfunctioning, or there could be a loose or damaged wire in the system.
- Defective Airbag Control Module (ACM): The airbag control module could have a fault preventing proper deployment or communication.
- Faulty Stage 1 Deployment Circuit: The circuit controlling the initial stage of airbag deployment might be damaged.
- Corrosion or Loose Connections: Wiring connections related to the third-row airbag could be corroded or loose, preventing proper communication with the airbag system.
- SRS (Supplemental Restraint System) Issues: Any issue within the supplemental restraint system, such as the airbag or seatbelt pre-tensioners, can trigger this code.
How to Fix it?
Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Common Diagnose and Repairs:
- Scan for Codes: Use an OBD-II scanner to check for any related airbag or SRS codes. You may find other codes that provide more context about the specific nature of the issue.
- Visual Inspection: Inspect the airbag sensor and wiring in the third-row seat area. Look for signs of wear, corrosion, or loose connections.
- Check the Airbag Control Module: Perform a diagnostic test on the airbag control module (ACM). Ensure that it is receiving and sending signals correctly.
- Test Continuity: Test the continuity of the wiring related to the third-row right frontal airbag sensor. A break or short could trigger this code.
- Check for Deployment System Faults: If the system was deployed in an accident or is old, the airbag sensors or deployment system might need recalibration or replacement.
- Reset and Test: After repairs or adjustments, reset the OBD-II codes and perform a road test to check if the issue persists.
